Chapter 2
Unpacking and Installing the Chassis
Pivot the ejector levers to unseat the FC card from the backplane connector.
d.
Slide the FC card out of the slot and place it directly into an antistatic bag or other ESD-preventive
e.
container.
Figure 2-29
a Loosen the captive screws.
b Push in both ejector lever release buttons.
Removing a Fabric Card from the Cisco ASR 9922 Router Chassis
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Removing Cards from the Chassis
c Pivot the ejector levers outward to unseat the card
from the backplane connector.
d Slide the card out of the chassis.
2-37