Cisco ASR 9000 Series Installation Manual page 117

Chapter 2 Unpacking and Installing the Chassis
To install the Cisco ASR 9010 Router chassis in a Seismic 2-post rack for optional earthquake
Note
protection, two side brackets must be mounted to the chassis for attachment to the posts
(5" channel width) of the GR-63 Zone 4 Seismic 2-post rack.
Figure 2-35
components used in the installation.
Figure 2-35
1
1 Five screws per
side (minimum) to
attach the router
chassis to the rack
shows the orientation of the Cisco ASR 9010 Router chassis to the Seismic 2-post rack and
Installing the Cisco ASR 9010 Router Chassis in a Seismic 2-Post Rack
2 Four screws
(minimum) to attach
the rear mounting
bracket to the rack
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Rack-Mounting the Router Chassis
2 3
3 Rear mounting 4 Five screws to
bracket
4
attach the rear
mounting bracket to
the router chassis
2-43