Installing Chassis Accessories
Figure 2-62
1
1 Plastic chassis corner piece attaches to
After the chassis has been installed in the rack and all chassis accessories have been attached, you can
install the fan trays, power supply modules, and RSP and line cards. See
and Modules in the Chassis"
Installing Optional Air Baffles on the Cisco ASR 9006 Router
The Cisco ASR 9006 Router has an optional air baffle accessory kit (800-43858-01) for mounting the
router chassis in a 2-post or 4-post 19-inch rack. The accessory kit includes:
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
2-74
Installing Plastic Chassis Corners on the Cisco ASR 9006 Router (Optional
Accessories Installation)
2
metal bracket at upper left corner of
chassis
for detailed installation instructions.
–
One plenum with two pre-installed front rack-mounting brackets for attaching plenum to front
side of rack-post
–
One support bracket
–
One plastic glide strip
–
Two rear rack-mounting brackets for attaching plenum to rear side of rack-post
Twelve 12-24 x 0.5 in. pan-head screws (six for attaching support bracket to chassis and six for
–
securing chassis to rack-mounted plenum)
–
Twelve 8-32 x 0.5 in. pan-head screws for attaching rear rack-mounting brackets on plenum
Chapter 2
Unpacking and Installing the Chassis
2 Plastic chassis corner piece attaches to
metal bracket at upper right corner of
chassis
Chapter 3, "Installing Cards