Cisco ASR 9000 Series Installation Manual page 255

Chapter 5 Replacing Cisco ASR 9000 Series Router Components
Figure 5-12
Step 5 For the Cisco ASR 9912 Router, the vented power tray bezel is a base chassis accessory that snaps onto
the front of the power system. comes with ball studs already installed. Remove it by pulling it away from
the chassis (see
Loosen and remove the four screws (two screws at each end) that attach the power tray to the chassis.
Step 6
Step 7 Loosen the two captive screws (one per ejector lever) to release the ejector levers.
process for the version 1 power trays, and
Figure 5-13
1
Removing the Front Power Tray Bezel on the Cisco ASR 9922 Router
Figure 2-81).
Removing a Power Tray—Version 1 Power Tray (Cisco ASR 9010 Router Shown)
2
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Removing and Replacing Power System Components
Figure 5-14 shows the process for the version 2 power trays.
3
Figure 5-13 shows the
5-21