Sd Record Module Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Sub Menu (Cont.)
SD Record Module (Optional Feature)
1. The SD Record Module features are applicable when the
optional daughter board is installed in the Hybrid Quest™
DVR and the SD Card Slot on the front of the DVR is enabled
(see Figure 12).
From the Sub Menu, select the SD Record Module feature
2.
(see Figure 13) using the arrow buttons on the remote, and
press Enter.
The SD Record Module menu will have the following
3.
adjustable features: Format SD (Manual or Auto), Format SD
(Run) and Upgrade (Run) (see Figure 14).
The first Format SD option is used to set Manual or Auto
4.
formatting (see Figure 14). Use the plus or minus buttons
on the remote to select your preferred option.
The second Format SD option is used to begin the
5.
formatting process (see Figure 14). Use the Enter button to
begin formatting.
Before selecting the Upgrade option, please contact
6.
technical support at the AngelTrax corporate office at
1.800.673.1788.
NOTICE - SD DAUGHTER BOARD:
The SD Record Module features are ONLY available if
the optional SD Daughter Board has been installed on
the Hybrid Quest™ DVR and the SD Card Slot on the
front of the DVR is enabled.
AngelTrax | 56
SD Card Slot
SD Card Slot
A/V Host
Rec. SD
Output
Rec. 1
Rec. 2
Reset
Reset
12
Remote
Slave
Main Board
GPS PWR
12V DC
Output
Power Supply
PWR Link
LAN
13
14