Parts List (Accessory Box); Tools Needed For Installation Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Parts List (Accessory Box)

The Hybrid Quest™ DVR comes with all of the parts required for a qualified field engineer to perform a complete installation in your vehicle.
1
3
2
8
9
1. MOUNTING BRACKET
Mounting bracket used to secure
the DVR to the bulkhead
2. MOUNTING BRACKET
SCREWS
Six (6) screws used to secure the
mounting bracket and DVR to the
bulkhead
3. KEYS
Version 1 - Three (3) keys: 1102,
905 and 07. Version 2 - Two (2)
keys: 905 and 07
4. SPARE FUSES
Two (2) fuses for B+ and ignition
5. RCA CABLES
Connects a portable monitor
Tools Needed for Installation
A qualified field engineer MUST perform the installation to ensure reliable operation. Ninety-nine percent of all issues concerning our
MDVRs are related to improper installation.
The following tools and supplies are needed for proper installation:
• Power drill with various bits
• Stepper drill bit
• Fish tape
• Various wire connectors
• Multimeter
AngelTrax | 3
4
11
10
12
6. A/V ADAPTER CABLE
A/V cable for portable monitor.
Connect cable to A/V output on the
main board located on the front of
the DVR
7. USB CABLE
For HDD connection to PC
8. DRIVER ACTION CABLE
For driver action events
9. DRIVER ACTION
EXTENSION CABLE
For extending driver action cable
to DVR
10. WIRELESS REMOTE CONTROL
Remote for DVR setup
11. ALLEN TOOL
To remove screws from components
• Portable monitor with audio
(AngelTrax MON7AT installation
monitor is recommended)
• Various screwdrivers and nut
drivers (0.3125 in)
5
14
13
16
12. BOARD REMOVAL TOOL
13. POWER AND
14. COVER PANEL
15. COVER PANEL SCREWS
16. DB-15 SERIAL CABLE
17. PANIC BUTTON AND CABLE
•
•
•
•
7
6
15
Tool to remove components
IGNITION CABLE
Cables for power connection
For covering space on components
that are unused (i.e. VSM™)
Screws to secure cover panel
to DVR
Camera connection (MDSD001
1-4 channel camera cables
Button to mark hard drive and label
as 'PANIC' for easy review
Wire ties
Split loom
Connectors for signal inputs
Rubber grommets
17
)