Alert Setup Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Sub Menu (Cont.)
Alert Setup (Optional Feature)
This feature is used to set up wireless GPRS notification alerts
sent via text message or email. Operational only with the use of
a LAN or cellular wireless connection.
From the Sub Menu, select the Alert Setup feature (see
1.
Figure 15) using the arrow buttons on the remote, and
press ENTER.
Alert Setup features (see Figure 16) are used for notification
2.
when the unit is set up to send GPRS wireless notifications.
Each feature can be set up for the following notifications:
Enable: Sends user a notification each time an alert
•
feature occurs.
Once: Sends the user a one-time notification.
•
• Disabled: Turns off the notification feature.
From the Sub Menu, use the arrow buttons on the remote to
3.
navigate to the Alert Setup feature, and press ENTER. The
following features are available in the Alert Setup menu:
Panic:
Video Status:
Over Speed:
Over G-Force:
Start Recording:
Stop Recording:
HDD Fail:
DVR Boot Up:
Stop Arm:
Clock Set to GPS Time:
DVR ID Change:
HDD Recycle Mode:
SD Recording Status:
Date/Time Change:
Power Key Off:
Snapshot Source:
AngelTrax | 57
Notification for panic button use
Notifies the user if any of the cameras stop working
Notification when driver exceeds the preset speed limit
Notification of the impact sensors for sudden stops or collisions
Notification of vehicle ignition and starting motion
Notifies user if unit stops recording for any reason
Notifies user of problems with the hard disk drive
Notifies user of system boot-up
Notifies user each time the stop arm is activated to load/unload passengers
Notifies user when the DVR has reset time to GPS satellite
Notifies user if someone has changed the DVR ID settings
Notifies user if the hard disk drive has been taken out of Recycle mode
Notifies user if SD card in daughter board stops recording
Notifies user if the Date/Time has been manually changed
Notifies the user when the vehicle ignition has been turned off
Notifies the user of a panic event via text message or email. The message will include a snapshot
JPEG from the onboard camera set here.
15
16