Audio Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Sub Menu (Cont.)
Audio
Users may select one audio channel at a time (by pressing the
Audio button on the remote), in order to hear audio for each
camera separately. The Audio remote button is utilized during
installation to test microphones for each camera location.
Audio may be deactivated by pressing the Mute remote button.
The Mute feature offers the option to mute audio through the
monitor connected to the DVR.
The Input Volume (gain coming into the DVR) and Output Volume
(gain coming out of the DVR) settings under the Sub Menu are
for adjusting audio volume.
1. From the Sub Menu, select the Audio feature (see Figure 10)
using the arrow buttons on the remote, and press Enter.
The Input Volume and Output Volume range from one to 16,
2.
with volume level 16 being the loudest (see Figure 11).
3. Press the plus or minus buttons on the remote to adjust the
Input Volume and Output Volume for the cameras.
To save your changes and return to the Sub Menu, press the
4.
Menu button on the remote.
AngelTrax | 55
10
11