Section 3: Dvr Installation; Hybrid Quest™ Parts And Functions Diagram - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Section 3: DVR Installation

This section details the installation of the Hybrid Quest™ mobile DVR, including the DVR's parts and functions, installation best
practices, mounting the DVR and connecting the signal, camera and power cables.
Hybrid Quest™ Parts and Functions
4
Intellitrax Virtual Synchronized Mapping Module
READY
G Sensor Box
to be installed horizontally &
follow the position as shown
Power Ready Strike X Axial Y Axial Z Axial
AngelTrax | 6
1
2
3
5
6
7
Front
Left Right
Back
1. MAIN DVR HOUSING
• Houses components
• All cable connections
• Mounts to bulkhead/wall bracket
• Hard Drive (500GB standard/Up to 1TB capable)
• Power indicator light (red)
• Record indicator light (Rec 1, Rec 2 and Rec SD) (amber)
• Reset indicator (green)
• GPS indicator (blinking green)
• A/V Output
• Power supply output (12V DC negative ground)
• Remote receiver
• USB host port
• USB slave port
• Key lock
• SD card slot
2. HARD DRIVE TRAY
3. FRONT COVER
• Remote access window
• Front key lock
• A/V output opening
• 12V DC output connection
4. BACK COVER
• Cable pull-through
• Back cover lock
5. MOUNTING BRACKET
• Rubber standoffs for shock absorption
• Connects to DVR and mounting surface
6. VSM™ SLOT COVER
• Covers VSM™ slot when VSM™ is not installed
7. G-SENSOR BOX (OPTIONAL FEATURE)
• Detects changes in G-Force such as sudden stops
or collisions
• Power (LED) indicator
• Ready (LED) indicator
• Strike (LED) indicator
• X Axial (LED) indicator (measures front to back impact)
• Y Axial (LED) indicator (measures side to side impact)
• Z Axial (LED) indicator (measures up and down impact)