AngelTrax Hybrid Quest MDVR Quick Setup Manual page 55

Network Setup (Cont.)
4. To save your changes, use the arrow buttons on the remote
to select the Save option and press ENTER. To clear the
current settings, use the arrow buttons on the remote to
select the Clear option and press ENTER. To return to the
Network Setup menu, press the Menu button on the remote.
E-mail Address Setup
THE E-MAIL ADDRESS SETTINGS DETERMINE WHICH EMAIL
ADDRESSES WILL RECEIVE NOTIFICATIONS FROM THIS DVR.
From the Network Setup menu, select E-mail Address and
1.
press the ENTER button on the remote (see Figure 6).
2. UNTIL THE DVR HAS MADE A SUCCESSFUL
CONNECTION, NONE OF THE SETTINGS IN THIS MENU
WILL BE ADJUSTABLE.
3. Once a successful connection has been made, use the plus
or minus buttons on the remote to enter up to three (3)
e-mail addresses in the spaces provided (see Figure 7).
4. To save your changes to each email address, use the arrow
buttons on the remote to select the Save option below it
and press ENTER. To clear an entered email address, use
the arrow buttons on the remote to select the Clear option
below it and press ENTER. To return to the Network Setup
menu, press the Menu button on the remote.
AngelTrax | 48
NOTICE - E-MAIL ADDRESS SETUP:
Email addresses to receive DVR notifications can be set
up through the Email Address settings under Network
Setup or — depending on your configuration — through
MOTOTrax™, AngelTrax's Online Surveillance Manager.
6
7