Vehicle Id Type And Number Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Vehicle ID Type and Number
1. Select Sub Menu from the Main Menu using the arrow
buttons on the remote (see Figure 1), and press ENTER.
At the Sub Menu, use the arrow buttons on the remote, to
navigate to the DVR ID menu (see Figure 2), and
press ENTER.
2. At the DVR ID menu, you will have the following options:
Vehicle Type, Vehicle ID, Driver and Client.
Select Vehicle Type and press the plus or minus button
3.
on the remote to scroll through the options. These options
include: Bus, ID, Train, Truck and Taxi. Select the desired
option and press ENTER (see Figure 3).
4. Select the Vehicle ID option using the arrow buttons on
the remote. Edit each digit by pressing the plus or minus
buttons on the remote. There are eight digits, and available
options are A through Z, and zero through nine for
each digit.
Select the Driver option using the arrow buttons on the
5.
remote. Edit each digit (20 options) by pressing the plus or
minus buttons on the remote. Options are A through Z or
zero through nine.
6. Select the Client option using the arrow buttons on the
remote. Edit each digit (20 options) by pressing the plus or
minus buttons on the remote. Options are A through Z or
zero through nine.
After setting adjustments have been made, press the Menu
7.
button on the remote to save your changes and return to the
Sub Menu. Press Menu again to return to the Main Menu.
Press Menu again if you wish to return to the live
camera view.
AngelTrax | 25
NOTICE - CHANGING VEHICLE
ID TYPE:
When the vehicle type is changed, the signal wire
labels will change. Please refer to the Driver Action-
detecting per Vehicle Table, page
more information.
1
2
3
15,
for