On-Screen Display Diagram - AngelTrax Hybrid Quest MDVR Quick Setup Manual

On-Screen Display Diagram

1
7
2
Indicator Features
1 Currently Displayed
Channels (1CH)
2 Camera Number
or Title
3 HDD available
space
4 DVR Mode (HD)
5 Recycle or Once
6 Vehicle ID
7 Live Audio Channel
AngelTrax | 19
4 3
15
8 9
10
Description
The number of video channels that the system is currently displaying on the attached
viewing monitor.
Channel or camera titles with a maximum of four characters each. To change the camera
title, go to Camera Setup > Title Setup. See the Title Setup Section, page 27.
The percentage of storage space remaining on the MDVR hard drive. The percentage
default displayed is 99 percent.
HD1 is the default setting, and shows which HD is being recorded to.
Recycle (R) is the default setting. The Recycle record mode allows the hard drive to
continuously record. The oldest data on the hard drive will be recorded over when the hard
drive is full, and will display on the camera view as Overwrite (OW).
The Once (O) record mode allows the hard drive to record until full.
The Vehicle ID number default is ID00000000. Users can select from BUS, ID, TRAIN,
TRUCK or TAXI, and set an eight-digit identification number.
A01 is the default audio channel for the local (onboard) monitor. Users can select one
audio channel at a time in order to hear audio for each camera. There are four channels.
5 6
14
16
11
12
17
13