G Sensor Box Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

G Sensor Box (Optional for the Hybrid Quest™)
The G Sensor box detects changes in G-Force, such as sudden stops or collisions. If the G Sensor box is connected to the DVR G-Force
receiver port, G-Force impact (X=front to back, Y=side to side and Z=up and down), is recorded. See Section 4: Hybrid Quest™
Connections, Ports and Controls, page 14, for further information.
G Sensor Box
to be installed horizontally &
follow the position as shown
Power Ready Strike X Axial Y Axial Z Axial
AngelTrax | 13
Front
Left Right
Back
The Box has the following LED indicators:
• Power (LED) indicator
• Ready (LED) indicator
• Strike (LED) indicator
• X Axial (LED) indicator (measures front to back impact)
• Y Axial (LED) indicator (measures side to side impact)
• Z Axial (LED) indicator (measures up and down impact)
G Sensor Box Orientation:
As indicated on the diagram on the top of the G Sensor Box,
the unit must be installed horizontally and oriented so that the
correct sides face the correct corresponding areas of the vehicle.
When installed correctly, the top of the unit (pictured to the left)
will be facing up toward the roof of the vehicle.
NOTICE - G SENSOR INSTALLATION:
The G Sensor Box is to be installed horizontally and
follow the position as shown on the unit.