Section 9: Common Operations; Removing The Hard Drive For Playback Instructions - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Section 9: Common Operations

This section details common tasks you will perform in the use of the Hybrid Quest™ DVR. For more common operations such as
searching through video footage, playing back your footage or archiving video files, see the manual for the AngelTrax playback software
version you have installed or check the AngelTrax How-to Documents on the Support page at www.angeltrax.com.
Removing the Hard Drive for Playback
INSERTING A HARD DRIVE FROM ANOTHER DVR INTO THE
HYBRID QUEST™ WILL AUTOMATICALLY FORMAT THE DRIVE,
ERASING ALL RECORDED DATA THAT THE HARD DRIVE
CONTAINS. PLEASE BE SURE TO BACK UP ANY SENSITIVE
MATERIAL STORED ON A HARD DRIVE BEFORE INSERTING IT
INTO THE HYBRID QUEST™.
1. Using the keys supplied, remove the front cover from the
Hybrid Quest™ by turning the medium-sized key (905)
clockwise (see Figure 1).
2. If your Hybrid Quest™ DVR has a lock on the main board,
use the smallest key supplied (1102) to unlock the hard
drive. To unlock the hard drive, turn the key one quarter turn
counter-clockwise. (see Figure 2).
3. Lift the hard drive handle up to release it from the unit, then
slide it forward and out of the DVR (see Figure 3).
AngelTrax | 67
Modular
Hybrid
SD Card Slot
Component
Remote
A/V Host
MDVR
Rec. SD
Output
Rec. 1
Rec. 2
Main Board
GPS PWR
12V DC
Reset
Output
Power Supply
Reset
PWR Link
1
2
Slave
3
Hard drive handle