Table of Contents
Advertisement
Backup Setup (Cont.)
6.
A USB Connect Ok message will appear at the bottom of
the Backup Setup menu when all connections are made
(see Figure 7).
7.
Locate the AngelTrax video data playback software
(FlexPlay™ or FlexPlay Pro™) on your desktop, and follow
the appropriate user instruction manual for playing back
your recorded video data.
USB Master
The USB Slave and USB Master settings are adjusted using
your remote, a flash drive or USB cord and a laptop.
1.
Using the supplied keys, remove the front cover from the
Hybrid Quest™ by turning the medium-sized key
(905) clockwise.
2.
Connect a 4GB (Gigabyte) flash drive to the USB Host Port
on the Hybrid Quest™ (see Figure 8). The 4GB flash drive
should hold about 30 minutes of video footage.
3.
From the Backup Setup menu, select USB Master (see
Figure 9) using the arrow buttons on the remote, and
press ENTER.
The Begin and End times of video data are displayed under
4.
the HDD feature of the USB Master menu.
5.
The Begin and End times of video you want to backup is
displayed under the USB Backup feature of the USB Master
Setup menu (see Figure 10). Use the arrow buttons on the
remote to select the date and time for backup, and the plus
and minus buttons on the remote to adjust the settings.
6.
After the selected backup times have been entered, use the
arrow buttons on the remote to highlight the Run option
under the USB Backup feature (see Figure 10).
AngelTrax | 41
SD Card Slot
A/V
Host
USB Host Port
Output
Reset
7
8
Remote
Slave
Rec. SD
Rec. 1
Rec. 2
Main Board
GPS
PWR
12V DC
Output
Power Supply
Reset
PWR
Link
9
LAN
10
Hide quick links:
Advertisement
Table of Contents
