Event Backup Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Backup Setup (Cont.)
Event Backup
Use the Event Backup feature to adjust the Last Event No.,
Download Time and BF (Before) Event.
Last Event No. The feature used to select the number
of events recorded and stored last on
the Hybrid Quest™. (Ranges from one
to five (1-5) events.)
Download Time The feature used to adjust the length
of time for each event. (Ranges from
30 seconds to six minutes.)
BF Event 30 SEC The feature used to turn ON or OFF
a 30 second prerecorded time before
event occurrence.
13. At the Backup Setup menu, select Event Backup (see Figure
12) using the arrow buttons on the remote, and
press ENTER.
14. At the Event Backup menu, select the Last Event No. feature
(see Figure 13). Press the plus or minus buttons on the
remote to adjust the feature. Select the number of events
recorded and stored last on the Hybrid Quest™ to view on a
laptop without removing the Hybrid Quest™ hard drive. You
may review up to five events from the USB Host Port.
15. At the Event Backup menu, select the Download Time
feature (see Figure 14) using the arrow buttons on the
remote. Press the plus or minus buttons on the remote to
adjust the feature, setting the length of time for each event.
The length of the event clip can be up to six minutes long.
16. At the Event Backup menu, select the BF Event 30 Sec
feature (see Figure 15) using the arrow buttons on the
remote. Press the plus or minus buttons on the remote to
turn the BF Event feature OFF.
17. Press the plus or minus buttons on the remote again to turn
the BF Event feature back to ON.
18. To save your changes and return to the Backup Setup menu,
press the Menu button on the remote. Press Menu again to
return to the Main Menu.
AngelTrax | 43
12
13
14
15