Parts List (General) - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Parts List (General)

NOTICE: Hybrid Quest™ DVRs are hot-swappable component-based systems. The hot-swappable feature allows the drive to be removed
at any time while the DVR is powered up, allowing efficient and convenient maintenance.
Carefully review the tables below, which outline items needed for proper installation, and make sure you have all of the parts listed.
Hybrid Quest™ DVR
Base unit with key-locking front
& rear doors
ACCBX-1
Accessory Box - Contents listed individually in the Parts List (Accessory Box), page 3.
Optional equipment for the Hybrid Quest™ DVR:
INT-VSM
Internal VSM™ module
EXTRA MDSD001 CABLE
Optional (with 8
channel expansion)
Other items may be included with your system based on your order. Please check the contents of your order carefully. If any items in
your order are missing or damaged, please contact AngelTrax immediately by phone at 1.800.673.1788 or by email at
support@angeltrax.com for further assistance.
WARNING: To prevent fire or shock hazard, DO NOT expose this device to rain or moisture.
CAUTION: To reduce the risk of electric shock, DO NOT remove cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel.
AngelTrax | 2
MBQV4
DVR main board
SD DAUGHTER BOARD
Record data to an SD card
LAN COMPONENT
Internal 800MHz LAN
component
PSQV-1
Power supply board
GPS-E1
GPS antenna
AP ROUTER
External LAN router
HDD500HC
SATA hard drive
GFORCE-2 (3D)
3 axis G-Force inertia sensor