AngelTrax Hybrid Quest MDVR Quick Setup Manual page 69

Firmware Upgrade (Cont.)
After the DVR has rebooted, you will need to reformat the
hard drive.
1. Press MENU.
2. Use the arrow buttons on the remote to scroll down to
HDD SETUP (see Figure 5).
Press ENTER.
3.
4. Use the arrow buttons on the remote to scroll down to
HDD FORMAT (see Figure 6).
Press ENTER.
5.
6. Use the plus button on the remote to select the hard drive
number at the Select HDD option (see Figure 7).
7. Press ENTER.
8. Use the arrow buttons on the remote to scroll down to
FORMAT. (see Figure 7)
Press ENTER.
9.
10. Use the plus button on the remote to select YES.
11. Press ENTER.
12. The hard drive will format and return to the recording
when finished.
AngelTrax | 62
NOTICE - FORMATTING THE MDVR'S
HARD DRIVE:
Formatting will ERASE ALL INFORMATION ON THE
HARD DRIVE. If you have any information you need
off the drive, be sure to retrieve it first.
5
6
7