Table of Contents
Advertisement
Backup Setup (Cont.)
How to Backup an Event to a Thumb Drive
1.
Using the supplied keys, remove the front cover from the
Hybrid Quest™ by turning the medium-sized key
(905) clockwise.
2.
Connect a 4GB (Gigabyte) flash drive to the USB Host Port
on the Hybrid Quest™ (see Figure 16). The 4GB flash drive
should hold about 30 minutes of video footage.
3.
Point the remote at the Hybrid Quest™. Press the Copy
button (located on the right side of the remote) twice, and
the ENTER button once (see Figure 17). If your monitor is
hooked up to the MDVR, a Backup message will appear at
the bottom of the screen.
4.
A long tone will sound to alert you that the event files have
finished downloading.
Remove the flash drive from the USB Host Port. Plug the
5.
flash drive into a USB port on your laptop.
6.
Locate the AngelTrax video data playback software
(FlexPlay™ or FlexPlay Pro™) on your desktop, and follow
the appropriate user instruction manual for playing back
your recorded video data.
AngelTrax | 44
SD Card Slot
A/V
Host
USB Host Port
Output
Reset
MENU
ENTER
REWIND
PLAY
AUDIO
NOTICE - EVENT FILE SIZE:
CAM1
CAM2
The event files are very large, so it may take a few
minutes for the files to load.
16
Remote
Slave
Rec. SD
Rec. 1
Rec. 2
Main Board
GPS
PWR
12V DC
Output
Power Supply
Reset
PWR
Link
LAN
17
ZOOM
SEQUENCE
COPY
PAUSE
STOP
POP
QUAD
CAM3
CAM4
Hide quick links:
Advertisement
Table of Contents
