Status Select Section - AngelTrax Hybrid Quest MDVR Quick Setup Manual

Camera Setup (Cont.)
Status Select
From the Main Menu, select the Camera Setup option using
1.
the arrow buttons on the remote, and press ENTER. Select
the Status Select option (see Figure 11) using the arrows on
the remote, and press ENTER.
2. The following options are available under the Status Select
menu (see Figure 12):
Full Screen By Door (Turn ON or OFF)
•
Camera view is full screen and selectable for the
particular view, depending on the door trigger hookup.
Live Display (Turn ON or OFF)
•
If an optional monitor (backup monitor use only) is
being used, Live Display should be turned OFF .
Door 1 (Select Camera Number)
•
Select camera channel to be used for this location.
• Door 2 (Select Camera Number)
Select camera channel to be used for this location.
BU (Backup) Display (Select Camera Number)
•
Select camera channel to be used for this location.
Press the Menu button on the remote to save your changes
3.
and return to the Camera Setup menu. Press Menu again to
return to the Main Menu.
AngelTrax | 31
11
12