Table of Contents
Advertisement
Sub Menu (Cont.)
G Sensor (Optional Feature)
1.
From the Sub Menu, select the G Sensor feature (see Figure
5) using the arrow buttons on the remote and press ENTER.
G Value is the value assigned to impact force. The following
2.
selections can be made using the plus button on the remote
(0.5 through 2.5 - see Figure 6). The higher the number
selected, the greater the impact registered. A notification
marker will be made on the CF card for any force registered
over your selected value.
3.
To save your changes and return to the Sub Menu, press the
Menu button on the remote.
PTZ
THIS FEATURE IS NOT USED IN THE TRANSPORTATION/
MOBILE INDUSTRY .
DVR ID
Refer to the Vehicle ID Type and Number Section, page 23, for
further information.
Factory Default
From the Sub Menu, select the Factory Default feature (see
4.
Figure 7) using the arrow buttons on the remote, and
press ENTER.
5.
Press the plus or minus buttons on the remote to change
the Load Factory Default option from NO to YES (see Figure
8). Press ENTER on the remote to reset all DVR settings
back to the factory default settings.
6.
To save your changes and return to the Sub Menu, press the
Menu button on the remote.
AngelTrax | 41
5
6
7
8
Hide quick links:
Advertisement
Table of Contents
