NSR150SP
______________________________________________
STATOR REMOVAL
NOTE
Refer to page 10 for alternator (charging coil)
inspection.
Remove the drive sprocket cover.
Remove the fuel tank
Disconnect the alternator 3P connector
and ignition pulse generator 2P
connector.
Remove the left crankcase cover bolts
and left crankcase cover.
NOTE
•
Loosen the left crankcase cover bolts in a
crisscross pattern in several steps.
•
The left crankcase cover (stator) is magnetically
attached to the flywheel, be careful
to removal.
Remove the gasket and dowel pins.
Remove the grommet from the left
crankcase cover.
Alternator/Balancer
11-2
http://mototh.com