Kubota V3600-E3 Shop Manual page 78

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Emergency stop by sensor activation
1. A specified time after the key switch has been
returned from the ST to ON position, the system gets
ready to detect an error.
2. The oil pressure switch stays out of function while the
engine is at a stop. When the oil pressure is as
specified, the switch gets back to normal after the
engine has got restarted.
3. If any of the sensors detects an error, the proportional
solenoid power is interrupted, which brings the engine
to a stop.
(1) Key Switch
(2) Oil Pressure Switch
(3) Proportional Solenoid
Usual stop
1. A specified time after the key switch has been
returned from the ST to ON position, the system gets
ready to detect an error.
2. The oil pressure switch stays out of function while the
engine is at a stop. When the oil pressure is as
specified, the switch gets back to normal after the
engine has got restarted.
3. When the key switch is set to the OFF position, the
proportional solenoid power is interrupted, which
brings the engine to a stop.
(1) Key Switch
(2) Oil Pressure Switch
(3) Proportional Solenoid
M-17
DIESEL ENGINE
(A) Engine Started
(B) Delay Timer
(C) Error Detected
W1030317
(A) Engine Started
(B) Delay Timer
W1016017