Kubota V3600-E3 Shop Manual page 195

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Clearance between Piston Ring and Groove
1. Remove carbon from the ring grooves.
2. Measure the clearance between the ring and the groove with a
feeler gauge or depth gauge.
3. If the clearance exceeds allowable limit, replace the ring.
4. If the clearance still exceeds the allowable limit after replacing the
ring, replace the piston.
[V3600-E3B, V3600-T-E3B, V3600-E3CB, V3600-T-E3CB,
V3300-E3BG, V3600-T-E3BG]
Second ring
Factory spec.
Oil ring
Second ring
Allowable limit
Oil ring
Factory specification : a
[V3800DI-T-E3B, V3800DI-T-E3CB, V3800DI-T-E3BG]
Top ring
Factory spec. Second ring
Oil ring
Top ring
Allowable limit Second ring
Oil ring
[A] V3600-E3B, V3600-T-E3B,
V3600-E3CB, V3600-T-E3CB,
V3300-E3BG, V3600-T-E3BG
S-103
DIESEL ENGINE
0.0930 to 0.120 mm
0.00367 to 0.00472 in.
0.020 to 0.060 mm
0.00079 to 0.0023 in.
0.20 mm
0.0079 in.
0.15 mm
0.0059 in.
More than 0.2 mm
0.008 in.
0.05 to 0.09 mm
0.002 to 0.003 in.
0.0930 to 0.120 mm
0.00367 to 0.00472 in.
0.020 to 0.060 mm
0.00079 to 0.0023 in.
0.15 mm
0.0059 in.
0.20 mm
0.0079 in.
0.15 mm
0.0059 in.
[B] V3800DI-T-E3B, V3800DI-T-E3CB,
V3800DI-T-E3BG
W1066183