Kubota V3600-E3 Shop Manual page 58

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Jig for Governor Connecting Rod
Application: Use for connecting the governor connecting rod to the
rack pin of the fuel injection pump assembly.
A 1 mm radius (0.04 in. radius)
B Chamfer 0.2 mm (0.008 in.)
C Chamfer 2 mm (0.08 in.)
D 35 mm dia. (1.4 in. dia.)
E Chamfer 1 mm (0.04 in.)
F Chamfer 0.1 mm (0.004 in.)
G 1 mm radius (0.04 in. radius)
H Chamfer 0.2 mm (0.008 in.)
I 8 mm radius (0.3 in. radius)
J 1 mm radius (0.04 in. radius)
K 1 mm radius (0.04 in. radius)
L Chamfer 0.2 mm (0.008 in.)
M Chamfer 0.2 mm (0.008 in.)
N 29 mm (1.1 in.)
O 6 mm (0.2 in.)
P 10.7 mm (0.421 in.)
Q 35 mm (1.4 in.)
R 99.3 mm (3.91 in.)
S 45.65 to 45.75 mm (1.798 to 1.801 in.)
T 145 mm (5.71 in.)
U 16.15 to 16.35 mm (0.6359 to 0.6437 in.)
V 3 mm (0.1 in.)
W 10 mm (0.39 in.)
X 8 mm (0.3 in.)
(1) Material: S45C-D
G-46
G GENERAL
(2) Permanent Magnet: 8 mm dia.
(0.3 in. dia.)
Thickness: 3 mm (0.1 in.)
W1115114