Kubota V3600-E3 Shop Manual page 183

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Replacing Valve Guide
(When removing)
1. Press out the used valve guide with valve guide replacing tool.
(When installing)
1. Clean a new valve guide.
2. Apply engine oil to a new valve guide.
3. Press in a new valve guide with valve guide replacing tool until it
is flush with the cylinder head as shown in the figure.
4. Ream precisely the I.D. of the valve guide to the specified
dimension.
IMPORTANT
• Do not hit the valve guide with a hammer, etc. during
replacement.
(A) When Removing
S-91
DIESEL ENGINE
(B) When Installing
W1062212