Kubota V3600-E3 Shop Manual page 146

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Rocker Arm and Push Rod
1. Remove the rocker arm (3) as a unit.
2. Remove the push rods (1).
3. Remove the bridge arm (4).
(When reassembling)
• When putting the push rods onto the tappets (2), check to see if
their ends are properly engaged with the grooves.
IMPORTANT
• After reassembling the rocker arm, be sure to adjust the
valve clearance.
Tightening torque Rocker arm bracket screw
(1) Push Rod
(2) Tappet
(3) Rocker Arm
(4) Bridge Arm
S-54
DIESEL ENGINE
49 to 55 N·m
5.0 to 5.7 kgf·m
37 to 41 lbf·ft
[A] V3600-E3B, V3600-T-E3B,
V3600-E3CB, V3600-T-E3CB,
V3300-E3BG, V3600-T-E3BG
[B] V3800DI-T-E3B, V3800DI-T-E3CB,
V3800DI-T-E3BG
W1050212