Kubota V3600-E3 Shop Manual page 159

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Fuel Camshaft and Governor Weight (Continued)
NOTE
• Use a shock driver to remove the fuel camshaft bearing
stopper (6).
7. Remove the fuel camshaft bearing stopper (6).
8. Pull out the fuel camshaft and bearings (7) together from the
injection pump housing.
9. Remove the spacer.
V3800DI-T-E3BG only)
10.Remove the bearing's cir-clip (8).
11.Press out the bearings from the fuel camshaft.
Injection pump mounting
screw
Tightening torque
Injection pump mounting
nut
(When reassembling)
NOTE
• Be careful the direction of the governor sleeve.
• When reassembling the inside parts, put the oil on each
inside part slightly.
Fuel camshaft stopper
mounting screw
Tightening torque
Governor weight mounting
nut
(6) Fuel Camshaft Bearing Stopper
(7) Bearing
(8) Cir-clip
S-67
DIESEL ENGINE
(V3800DI-T-E3B, V3800DI-T-E3CB,
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
18 to 20 N·m
1.8 to 2.1 kgf·m
13 to 15 lbf·ft
7.9 to 9.3 N·m
0.80 to 0.95 kgf·m
5.8 to 6.8 lbf·ft
63 to 72 N·m
6.4 to 7.4 kgf·m
47 to 53 lbf·ft
(9) Fuel Camshaft
(10) Key of Fuel Camshaft
W1146489