Kubota V3600-E3 Shop Manual page 158

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Fuel Camshaft and Governor Weight
1. Separate the governor housing assembly from the injection
pump unit. (See the "Governor Housing Assembly".)
2. Remove the governor sleeve (1).
3. Remove the injection pump assembly (2).
4. Remove the under cover (3). (V3600-E3B, V3600-T-E3B,
V3600-E3CB, V3600-T-E3CB, V3300-E3BG, V3600T-E3BG
only)
5. Fix the fuel camshaft with open end wrench (4).
6. Loosen the governor weight holder mounting nut to remove the
governor weight (5).
(1) Governor Sleeve
(2) Injection Pump Assembly
(3) Under Cover
(4) Open End Wrench
(24 mm : V3600, V3600-T, V3300
22 mm : V3800DI-T)
(5) Governor Weight
S-66
DIESEL ENGINE
[A] V3600-E3B, V3600-T-E3B,
V3600-E3CB, V3600-T-E3CB,
V3300-E3BG, V3600-T-E3BG
[B] V3800DI-T-E3B, V3800DI-T-E3CB,
V3800DI-T-E3BG
W1144178