Kubota V3600-E3 Shop Manual page 189

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
Idle Gear Side Clearance
1. Set a dial indicator with its tip on the idle gear.
2. Measure the side clearance by moving the idle gear to the front
and rear.
3. If the measurement exceeds the allowable limit, replace the idle
gear collar.
Factory spec.
Idle gear side clearance
Allowable limit
[A] V3600-E3B, V3600-T-E3B,
V3800DI-T-E3B, V3300-E3BG,
V3600-T-E3BG, V3800DI-T-E3BG
Camshaft Side Clearance
1. Set a dial indicator with its tip on the camshaft.
2. Measure the side clearance by moving the cam gear to the front
and rear.
3. If the measurement exceeds the allowable limit, replace the
camshaft stopper.
Factory spec.
Side clearance
Allowable limit
[A] V3600-E3B, V3600-T-E3B,
V3800DI-T-E3B, V3300-E3BG,
V3600-T-E3BG, V3800DI-T-E3BG
S-97
DIESEL ENGINE
0.15 to 0.30 mm
0.0059 to 0.011 in.
0.9 mm
0.04 in.
[B] V3600-E3CB, V3600-T-E3CB,
V3800DI-T-E3CB
W1064208
0.070 to 0.22 mm
0.0028 to 0.0086 in.
0.30 mm
0.012 in.
[B] V3600-E3CB, V3600-T-E3CB,
V3800DI-T-E3CB
W1064307