Table of Contents
Advertisement
Rev 2.1
The spine side of
the shelf has two
slots for the
extension
Adjustable shelf
brackets
9.
Tighten the 16 hex head bolts on the adjustable brackets.
10.
Connect the lock-down bar onto the shelf, at the connector side.
The spine side of
the shelf has two
slots for the exten-
sion
11.
Place 14 caged nuts into the vertical rack support at the locations corresponding to the holes
in the chassis faceplate. The holes in the faceplate start at 2U above the shelf and are spaced
every 4U centered as you go up the vertical rack support. There are 7 holes on each side.
22
Figure 8: Shelf Brackets
Figure 9: Place the Lock-Down Bar on the Shelf
Chassis Installation
Install the lock-down bar
here.
Mellanox Technologies
Advertisement
Table of Contents
