648 Port InfiniBand QDR Switch Platform User Manual
4.
The shelf comes with the four brackets pre installed. Two of the brackets should be
loose. They may need to be removed and repositioned to meet the distance between
the vertical supports of the rack.
5.
Move the shelf brackets on the shelf. Place the shelf bracket so that it measures
slightly more than the measured distance between the vertical rack supports. Make
Mellanox Technologies
Figure 4: Vertical Rack Supports Dimension
Figure 5: Adjustable Shelf Brackets
These two brackets will
need to be adjusted. They
may even need to be
removed and repositioned.
The holes in the bracket are
offset to one side.
The holes must be closer to
the top of the shelf.
Rev 2.1
19