Table of Contents
Advertisement
648 Port InfiniBand QDR Switch Platform User Manual
1.2
Chassis Package Contents
The package includes:
• 1 chassis with the following modules installed:
18 spines
1 management module
8 fans
10 PSUs
• 1 installation kit
• 1 box containing 10 power cords 125V 10A, C14 to C13, 6 feet long, USA UL Standard
• 1 cable management kit
• 1 installation guide (this document)
Before you install your new IS5600 series chassis, unpack the system and check to make
sure that all the parts have been sent, check this against the parts list. Check the parts for
visible damages that may have occurred during shipping.
Mellanox Technologies
It is highly recommended that the installation site be equipped with smoke detectors
and a fire alarm warning system.
The system requires a KVA rated UPS system. The heat dissipation is calculated
(Power Dissipation x 3.42 = Heat Dissipation). It is recommended that a UPS system
be installed to protect the equipment in the event of unexpected power failure.
A fully loaded IS5600 switch system can draw 8 kW (~67A @ 120V or 34A@240V)
of power. Make sure that the outlets and circuits will not be overloaded. Spread out the
load over at least two or three circuits or use a 3 phase circuit.
The leafs, spines, and management modules are shipped separately.
If anything is damaged or missing, contact your customer representative immediately.
Rev 2.1
11
Advertisement
Table of Contents
