Rev 2.1
Shelf extension
Upper bracket Washer
Upper bracket
1.6.3.2
Opening the Container
1.
Before starting the procedure, put the ESD strap on and connect it to a valid ground.
2.
Remove the four sides of the container by unscrewing the phillips head screws holding the
sides on.
16
Figure 2: Installation Kit Parts
Upper bracket offset
Shelf
Chassis Installation
Lock-down bar
Flat head screws with
locktite
#6 hex head bolt
Phillips pan head
screw
#8 hex head bolt
Caged nuts
Lock washers
X8
Lock washers
X6
Flat washers
Flat washers
Mellanox Technologies