648 Port InfiniBand QDR Switch Platform User Manual
4.
Repeat steps 1- 3 for the second cable holder.
1.7
Installing the Leafs
The leaf boards can be installed in any of the available leaf slots.
Push the latch
release
1.
Start with the latch fully open, that is perpendicular to the front panel of the leaf.
2.
Carefully set the leaf board into the side guide rails and slowly slide the board into
the chassis.
3.
Catch the hooks onto the vertical bar and push the latch shut.
1.8
Inserting a Management Module
1.
Start with the latches fully open, that is perpendicular to the front panel of the leaf.
2.
Carefully seat the management module into the slot and slowly slide the board into
the chassis until the ejectors begin to engage on the chassis edge.
3.
Press the ejectors inward until the locks snap. This indicates that the board is fully
seated.
Mellanox Technologies
Figure 24: Ejector Latch
Leaf
Ejector
Leaf
Rev 2.1
33