Figure 5: Connect Rail Slide To Rack Vertical Support; Figure 6: Inserting The Caged Nuts For The Faceplate - Mellanox Technologies MSX6512-NR Hardware Installation Manual

216 Port InfiniBand FDR Switch Platform Hardware Installation Guide
Step 5.
Step 6.
Step 7.
Step 8.
Step 9.
Mellanox Technologies

Figure 5: Connect Rail Slide to Rack Vertical support

Place the four bolts for the caged nuts within reach.
Slide the shelf into the rail slides.
Put the shelf into place and screw the bolts into the nuts from step 2
Tighten all of the screws to 9.2 Nm or 81.5 pound inches.
Insert 8 caged nuts for the faceplate in the exact locations shown in
Figure 6,"Inserting the Caged Nuts for the Faceplate".

Figure 6: Inserting the Caged Nuts for the Faceplate

9
8
7
6
5
4
3
2
1
Shelf
Place the
caged nuts
here.
Rev 1.0
17