Supported Firmware And Software Versions - Sun Microsystems SPARC Enterprise M3000 Product Notes

Note – Power consumption monitoring measurement values are for reference only.
The power consumption value of the server varies by the conditions such as the
power supply in use, CPU types, system configurations, or system load.
You can also obtain the power consumption data using the SNMP agent function. To
obtain the power consumption data using the SNMP agent function, install the latest
XSCF extension MIB definition file to the SNMP manager. For details on the XSCF
extension MIB definition file, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
When there is a change in the power system, such as in the following occurrences,
wait for one minute, then check the value again.
During the server power-on or power-off, or after the power-on or power-off is
■
complete
During the active replacement of a power supply unit, or after the active
■
replacement is complete
Supported Firmware and Software
Versions
The Solaris Operating System and Sun Java™ Enterprise System software are
preinstalled on new SPARC Enterprise M3000s.
The following table lists the firmware and operating system (OS) versions that are
supported in this release.
Minimum Firmware and Operating System Versions for the M3000 Server
TABLE 1-1
Firmware and Operating System
XSCF Control Package (XCP)
Power consumption monitoring
Solaris Operating System
* See "Solaris Patch Information" on page 4
Check
http://sunsolve.sun.com
Many web browsers support the XSCF Web. The browsers in
demonstrated compatibility with the XSCF Web through testing.
Chapter 1
Airflow monitoring
for information about patches.
for the latest patch revision.
Sun SPARC Enterprise M3000 Servers Product Notes for XCP 1090
Version
XCP 1082
XCP 1081
Solaris 10 10/08
Solaris 10 5/08, with required patches
TABLE 1-2
*
have
3