Lamp Menu - Christie CP2000-M Setup Manual

2.6

LAMP MENU

The Lamp menu (Figure 2-5) provides controls for optimizing lamp alignment (LampLOC™),
maintaining a consistent light output over time (LiteLOC™), rotating the lamp, or setting a precise
power level for the lamp. These options are also available via the web ui Advanced:Lamp menu. For
information, refer to the CP2000-M/MR User Manual (020-100123-xx).
• LampLOC: This menu selection enables users to either automatically adjust LampLOC™ or to
manually adjust each axes.
• Lamp Change: This menu contains the lamp type, serial number and the number of hours already
logged on the lamp, if any. Acknowledge a lamp change has taken place by pressing Enter. For
information on lamp changeover, refer to the CP2000-M/MR Service Manual (020-100124-xx).
• Lamp Rotate: Lamp rotation is performed to physically rotate the bulb 180° to ensure an even burn
of the lamp. Rotating the lamp improves its performance and life expectancy. Lamp rotation must be
performed by Christie trained personnel only. The same safety precautions taken during lamp
replacement must be taken when performing a lamp rotation. For details, refer to
4.1 Lamp Replacement. Acknowledge lamp rotation has taken place by accessing this menu and
pressing Enter.
CP2000-M/MR Setup Guide
020-100205-03 Rev. 1 (05/09)
F 2-5 L M
IGURE AMP ENU
Section 2: Basic Operation
2-11