Admin: Tcgd Menu; Summary Of Admin: Tcgd Menu Options - Christie CP2000-M Setup Manual

2.13.4 Admin: TCGD Menu

The Admin: TCGD menu allows users to modify or create custom Target Color Gamut Data (TCGD)
files for new color gamut performance and set how closely to match the target white.
A Gain: Adjust luminance
B Enable to display a particular color
C XY: Record XY coordinates for each color
D Target TCGD: Save settings to a new
target file
E White Tolerance: Enable & disable
tolerance (a tolerance discards less light)

Summary of Admin: TCGD Menu Options

• TCGD and Save TCGD Notes
The "Target (TCGD)" color fields show the corresponding XY color coordinates defined for the
current target color gamut in use. Create a new custom target by defining different coordinates for 1 or
more TCGD colors (or simply by changing the tolerance state) and saving as a new TCGD file. NOTE:
Industry-defined TCGD standards, such as P7v2 and others, are write-protected and cannot be
changed—modifications to such a target must be saved under a new TCGD file name entirely. Once a
new TCGD file is created, it appears in the Channel:Page 2 menu, where it can be selected for use in
the display.
For most applications, TCGD values are used simply to verify displayed colors actually do match the
standard—i.e., each color can be measured at the screen and compare its coordinates to those
appearing in the TCGD fields to confirm the projected colors are accurate. For special applications to
create a unique target color standard, enter new TCGD coordinates as desired and then save as a new
TCGD file. Apply as usual from the Channel: Page 2 menu.
CP2000-M/MR Setup Guide
020-100205-03 Rev. 1 (05/09)
F 2-17 A : TCGD M
IGURE DMIN
F Save
G Restore: Cancel unsaved screen settings and
display previous saved settings
H Test: Preview settings in display without saving
I Define XY coordinates for 4 corners
Section 2: Basic Operation
ENU
2-27