Introduction; Purchase Record And Service Contacts; List Of Components - Christie CP2000-M Setup Manual

1

Introduction

This manual is intended for trained users authorized to operate professional high-brightness projection
systems. Only qualified Christie trained service technicians knowledgeable about all potential hazards
associated with high voltage, ultraviolet exposure and high temperatures generated by the lamp and
associated circuits are authorized to 1) assemble/install the projector and 2) perform service functions
inside the projector.
1.1

PURCHASE RECORD AND SERVICE CONTACTS

Should a problem be encountered with any part of the projector, contact a dealer. If you have
purchased the projector, complete the Purchase Record, below and keep with your records.
Table 1.1 Purchase Record
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
* The serial number can be found on the license label located on the back of the projector.
Table 1.2 Ethernet Settings
Default Gateway
DNS Server
Projector DLP Address
Projector Mgmt IP Address
Subnet Mask

1.1.1 List of Components

Ensure the following components were received with the projector:

Projector with Control Display Panel (CDP)
 User Manual
 Warranty Card
 Web Registration Form
CP2000-M/MR Setup Guide
020-100205-03 Rev. 1 (05/09)
1-1