Drive Chain - Suzuki GSX-R1000 Service Manual

Hide thumbs Also See for GSX-R1000:
Table of Contents

Advertisement

*
Excessive wear
*
Improper chain adjustment
* Missing O-ring seals
2-22
PERIODIC MAINTENANCE
DRIVE CHAIN
Inspect initially at 1 000 km (600 miles, 1 month) and
every 6 000 km (4 000 miles, 6 months) thereafter.
Clean and lubricate every 1 000 km (600 miles).
Visually check the drive chain for the possible defects listed
below. (Support the motorcycle by a jack and a wooden block,
turn the rear wheel slowly by hand with the transmission shifted
to Neutral.)
*
Loose pins
* Damaged rollers
*
Dry or rusted links
*
Kinked or binding links
If any defect is found, the drive chain must be replaced.
NOTE:
When replacing the drive chain, replace the drive chain and
sprockets as a set.
CHECKING
• Remove the axle cotter pin. (For E-03, 28 and 33)
• Loosen the axle nut
CD.
• Loosen the chain adjuster lock-nuts
CZl.
• Tense the drive chain fully by turning both chain adjuster bolts
@.

Advertisement

Table of Contents
loading

Table of Contents