Suzuki GSX-R1000 Service Manual page 141

3·88 ENGINE
• Install the starter clutch assembly onto the crankshaft.
NOTE:
When install the starter clutch assembly, fit the concave part
®
of the starter clutch onto the convex part @ of the crankshaft.
• Install the starter clutch bolt with the washer.
• Hold the starter clutch with special tool and tighten its bolt to
the specified torque.
ir' & 5ti
09920-34830: Starter clutch holder
~ Starter clutch bolt: 55 N·m (5.5 kgf-m, 40.0 Ib-ft)
STARTER IDLE GEAR
• Install the starter idle gear NO.2
CD,
its shaft (2) and the con-
caved washer Q).
• Apply SUZUKI BOND lightly to the mating surfaces
®
at the
parting line between the upper and lower crankcases and sur-
face @ as shown.
~99104-31140: SUZUKI BOND "1207B" (USA)
99000-31140: SUZUKI BOND "1207B" (Others)
• Install the new gasket @ and the dowel pins @.
I
CAUTION
I
I
Use a new gasket to prevent oil leakage.