Suzuki GSX-R1000 Service Manual page 355

MASTER CYLINDER INSPECTION
CYLINDER, PISTON AND CUP SET
Inspect the cylinder bore wall for any scratches or other dam-
age.
Inspect the cup set and each rubber part for damage.
MASTER CYLINDER REASSEMBLY AND
REMOUNTING
Reassemble and remount the master cylinder in the reverse
order of removal and disassembly. Pay attention to the following
points:
!CAUTIONI
*
Clean the master cylinder components with fresh
brake fluid before reassembly. Never use cleaning
solvent or gasoline to clean them.
*
Do not wipe the components with a rag.
* Apply brake fluid to the cylinder bore and all the
component to be inserted into the bore.
III
Specification and Classification: DOT 4
• Tighten each bolt to the specified torque.
(Brake hose routing: c::::T'1 0-21)
~ Brake hose union bolt
CD:
23 N·m (2.3 kgf-m, 16.5Ib-ft)
Rear master cylinder mounting
bolt~:
10 N·m (1.0 kgf-m, 7.0 Ib-ft)
Rear master cylinder rod lock-nut @:
18 N·m (1.8 kgf-m, 13.0 Ib-ft)
• Bleed air from the brake system. (c::::T'2-27)
INSPECTION AFTER REASSEMBLY
Rear brake (c::::T'2-26)
CHASSIS 8·69