Suzuki GSX-R1000 Service Manual page 142

r
• Install the starter clutch cover and tighten its bolt as shown.
NOTE:
*
Fit the wire clamp to the starter clutch cover bolt
®
as shown.
*
Fit the new gasket washer to the starter clutch cover bolt @ as
shown.
I
CAUTION
I
Use the new gasket washer to prevent oil leakage.
(!J
Starter idle gear cover bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
• Install the starter idle gear NO.1 shaft @, starter idle gear NO.1
({), washer @, thrust washer @, bearing @ and con caved
washer@.
• Install the dowel pins
©
and the new gasket
®.
I
CAUTION
I
I
Use a new gasket to prevent oil leakage.
• Install the starter idle gear cover and tighten its bolts to the
specified torque.
(!J
Starter idle gear cover bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
NOTE:
Fit the gasket washer to the bolt
©.
ENGINE 3·89
GEARSHIFT SYSTEM
• Install the gearshift cam stopper
CD,
its bolt
~,
washer @ and
return spring @.
NOTE:
Apply a small quantity of THREAD LOCK to the gearshift cam
stopper bolt
~
and tighten it to the specified torque.
~ 99000-32050: THREAD LOCK "1342"
(!J
Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)