Excva Inspection; Excv Cable Replacement - Suzuki GSX-R1000 Service Manual

6·6 EXHAUST SYSTEM
• Check the EXCVA to adjustment position. (c:::?6-4)
I
CAUTION
I
Do not use the adjustable wrench to turn EXCVA pul-
ley so as not to cause damage to the internal gear of
EXCVA.
• Install the pulley @ to the shaft @.
NOTE:
Make sure that the shaft's line @ and cable slots
©
facing
upward as shown.
• Hold the pulley with an adjustable wrench, and then tighten
the pulley mounting bolt to the specified torque.
~ EXCVA pulley mounting bolt: 5 N·m (0.5 kgf-m, 3.5 Ib-ft)
ICAUTION!
When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
• Tighten the EXCVA mounting bolt to the specified torque.
~ EXCVA mounting bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
!
CAUTION
I
The cable slots of EXCVA pulley must be located
upward (adjustment position). (c:::?6-4)
EXCVA INSPECTION
c:::?4-54
EXCV CABLE REPLACEMENT
• Disconnect the EXCV cables from the EXCVA pulley.
(c:::?6-5)
• Disconnect the EXCV cables from the EXCV pulley. (c:::?6-12)