• Install the tappet shims and the tappets to their original posi-
Apply engine oil to the shim and tappet before fitting them.
When seating the tappet shim, be sure the figure printed sur-
face faces the tappet.
• Remove the intake pipe.
• Install the intake pipe in the following procedure.
• Apply SUZUKI SUPER GREASE to the a-rings.
• Apply THREAD LOCK to the screw and install the intake
~ 99000-32050: THREAD LOCK "1342"
• Make sure that the "UP" mark
WATER BYPASS UNION
• Remove the water bypass union.
• Apply SUZUKI BOND to the thread part of the water bypass
union and tighten it to the specified torque .
• 12078]99104-31140: SUZUKI BOND "1207B" (USA)
99000-31140: SUZUKI BOND "1207B" (Others)
~ Water bypass union: 14 N·m (1.4 kgf-m, 10.0 Ib-ft)