Suzuki GSX-R1000 Service Manual page 335

SWINGARM BEARING
Insert the spacer into bearing and check the play when moving
the spacer up and down.
If excessive play is noted, replace the bearing with a new one.
• Draw out the swingarm pivot bearings
CD
and the swingarm
cushion rod upper bearings
~
with the special tool.
1m
09921-20240: Bearing remover set
I
CAUTION
I
The removed bearings must be replaced with new
ones.
CUSHION LEVER BEARING
Insert the spacer into bearing and check the play when moving
the spacer up and down.
If excessive play is noted, replace the bearing with a new one.
• Draw out the cushion lever bearings with the special tool.
1m
09921-20240: Bearing remover set
I
CAUTION
I
The removed bearings must be replaced with new
ones.
CHASSIS 8-49
,mll
\