• Install the thermostat case.
Fit the clamp to the thermostat case bolt@.
• Tighten the thermostat cover bolt to the specified torque.
~ Thermostat cover bolt: 10 N·m (1.0 kgf-m 7.0 Ib-ft)
• Install the fuel tank. (c::::TS-S)
• Install the front seat.
REMOVAL AND DISASSEMBLY
• Remove the under cowling. (c::::TS-3)
• Drain the engine coolant. (c::::T2-19)
• Drain the engine oil. (c::::T2-13)
Before draining engine oil and engine coolant, inspect engine oil
and coolant leakage between the water pump and crankcase.
engine oil is leaking, visually inspect the oil seal and a-ring.
engine coolant is leaking, visually inspect the mechanical seal
and seal washer. (c::::T 7-3)
COOLING AND LUBRICATION SYSTEM