• Install the gearshift forks and their shafts as shown.
For 3rd/4th drive gears
(2) For 6th driven gear
@ For 5th driven gear
• Apply a small quantity of THREAD LOCK to the bearing
retainer screws and the shift fork shaft retainer bolt.
• Tighten them to the specified torque.
~ 99000-32050: THREAD LOCK "1342"
~ Bearing retainer screw: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
Gearshift fork shaft retainer bolt: 19 N·m
(1.9 kgf-m, 13.7Ib-ft)