Suzuki GSX-R1000 Service Manual page 392

9·28 ELECTRICAL SYSTEM
FUEL LEVEL INDICATOR SWITCH INSPECTION
• Remove and disassemble the fuel pump assembly.
(c::::rS-10, 11)
• Connect 12 V battery and test bulb (12 V, 3.4 W) to the fuel
level indicator switch as shown in the right illustrations. The
bulb should come on after one minutes if the switch is in good
condition.
• When the switch is immersed in water under the above condi-
tion, the bulb should go out. If the bulb remains lit, replace the
unit with a new one.
FUEL LEVEL INDICATOR LIGHT INSPECTION
If the fuel level indicator light does not function properly, check
the fuel level indicator switch and its lead wire/coupler.
If the fuel level indicator switch and its lead wire/coupler are
functioning properly, replace the combination meter with a new
one.
ON
~rt)r----
<r.,
Test
bulb
OFF$
lsattery
Test ~
bulb
I
0
....
Wate;
/ '
'==